beam rear suspension造句

• The Astra features a torsion beam rear suspension with Bosch.
• A twist-beam rear suspension is such a system.
• The first generation used a twist-beam rear suspension and MacPherson struts in front, and featured a wheelbase.
• The "'L platform "'used a Twist-beam rear suspension and MacPherson struts in front and featured a wheelbase.
• The suspension system on all models uses a fully independent MacPherson strut front suspension, and a Twist-beam rear suspension.
• Twist-beam rear suspensions were pioneered on the Volkswagen Golf in the early 1970s, and remain common on compact cars and minivans.
• The suspension setup was identical to the Golf and consisted of a MacPherson strut setup in front and a twist-beam rear suspension.
• Retaining the compact torsion beam rear suspension and the centrally mounted fuel tank help contribute to a boot capacity of 470 litres.
• This new global B-platform project was initiated by Ford in Dearborn, MI and is equipped with front MacPherson strut and twist-beam rear suspension.
• Some reviewers commentated that when driven hard undesirable body characteristics were exhibited, possibly due to the combination of missing B-pillar and torsion beam rear suspension.
• It featured firmly sprung and damped, independent MacPherson strut front suspension and semi-independent twist-beam rear suspension, that gave crisp handling and good roadholding, without being too uncomfortable.
• The styling was all-new while retaining the original Punto's distinctive shape and design, while the chassis and interior were completely overhauled, with a new torsion beam rear suspension.
• A twist-beam rear suspension is very similar except that the arms are connected by a beam, used to locate the wheels and which twists and has an anti-roll effect.
• The compact layout of the torsion beam rear suspension also enables the new Astra to offer more room in the trunk, which provides a minimum 370 cubic decimeters of space.
• In general it is difficult to improve the kinematics of a suspension using the bushings, but one example where it does work is the toe control bush used in Twist-beam rear suspensions.
• The platform was also revised, with a twist-beam rear suspension system replacing the previous 3-link beam axle, and the front suspension making use of cast, rather than pressed and fabricated, lower control arms.
• The "'twist-beam rear suspension "'( also "'torsion-beam axle "'or "'deformable torsion beam "') is a type of automobile roll stiffness of the suspension, by twisting as the two trailing arms move vertically, relative to each other.
• The second generation Prairie lost some of the innovative features that made the 1st generation standout-the B-pillar was re-instated, the torsion beam rear suspension was replaced with a more conventional coil setup that prevented the rear seats from reclining.
• The Twist-beam rear suspension is a similar suspension design, however its beam axle is able to twist thereby functioning as an anti-roll bar to control the roll motion of the body and is considered to be an semi-independent suspension design.
• Changes would include body-coloured door handles, electronically regulated door mirrors with indicator lights and twin-torsion beam rear suspension, removal of the archaic kingpins from front suspension, and new engines such as the ZMZ-405 or licence built Chrysler DOHC and Steyr Diesels.